| Products > Test Equipment |
| Phase Angle Oscilloscope reading |
| (1/2) > >> |
| threephase03:
Hi All Does anyone know of any oscilloscopes that can display the phase angle between two signals without having to adjust lines etc. Cheers in advance |
| Anthocyanina:
the rigol 1054z, the keysight 1000x series, the analog discovery(more its software, so all the waveforms compatible devices) all have phase between 2 channels as a predefined automatic measurement that you just have to enable under the scope's measurement options. i mentioned those 3 as those are the ones i have that have the phase masurement, but i would think most other modern oscilloscopes also have automatic phase angle measurement |
| threephase03:
Thanks mate, ill check those out. Much appreciated |
| Andreas:
Hello, should be possible with every scope with math functions (even if there is no dedicated menue): https://www.picotech.com/support/viewtopic.php?t=10569 https://www.picotech.com/support/topic31641.html http://lab.fyi/oscilloscope_math_channels/accurate_phase_shift_calculation_formula/index.html with best regards Andreas |
| ADT123:
Whilst the above post is still correct the most recent version of PicoScope 7 can also plot a graph of the phase change between 2 channels using the built in phase maths channel function. See oscilloscope phase measuremes article https://www.picotech.com/library/oscilloscopes/phase-measurements-and-math-channels |
| Navigation |
| Message Index |
| Next page |