Products > Test Equipment

Phase Angle Oscilloscope reading

(1/2) > >>

threephase03:
Hi All

Does anyone know of any oscilloscopes that can display the phase angle between two signals without having to adjust lines etc.

Cheers in advance   

Anthocyanina:
the rigol 1054z, the keysight 1000x series, the analog discovery(more its software, so all the waveforms compatible devices) all have phase between 2 channels as a predefined automatic measurement that you just have to enable under the scope's measurement options. i mentioned those 3 as those are the ones i have that have the phase masurement, but i would think most other modern oscilloscopes also have automatic phase angle measurement

threephase03:
Thanks mate, ill check those out. Much appreciated

Andreas:
Hello,

should be possible with every scope with math functions (even if there is no dedicated menue):

https://www.picotech.com/support/viewtopic.php?t=10569

https://www.picotech.com/support/topic31641.html

http://lab.fyi/oscilloscope_math_channels/accurate_phase_shift_calculation_formula/index.html

with best regards

Andreas

ADT123:
Whilst the above post is still correct the most recent version of PicoScope 7 can also plot a graph of the phase change between 2 channels using the built in phase maths channel function.  See oscilloscope phase measuremes article https://www.picotech.com/library/oscilloscopes/phase-measurements-and-math-channels

Navigation

[0] Message Index

[#] Next page

There was an error while thanking
Thanking...
Go to full version
Powered by SMFPacks Advanced Attachments Uploader Mod