phase noise analyzer and phase noise measurement

[tjadwy]

I have a question: is there any way of extending the measurement to beyond 50 GHz (say 58GHz) while taking advantage of the cross-correlation? Can we use external mixers and LOs for our FSWP (or something else)?

external mixers can work.
https://www.rohde-schwarz.com/us/knowledge-center/videos/highly-accurate-phase-noise-measurements-beyond-50-ghz-using-the-r-s-fswp-phase-noise-analyzer-video-detailpage_251220-721984.html

Also Dr. Wolfgang Wendler's work:
https://scdn.rohde-schwarz.com/ur/pws/dl_downloads/dl_application/application_notes/1ef101/1EF101_1e_PhaseNoise_above_50GHz.pdf

[simon_grimm]

The PN2060A developer vendor has released server software which allows use of the instrument in conjunction with Timelab.  It works well and provides a significant functionality upgrade.

Could you (or anyone who knows) explain how to set up Timelab so it can receive the data stream sent by the analyzer? I cannot seem to figure it out

[drew23]

Hi

Email the maker, the email address is at the top of his webpage. He usually responds quite quickly.

Regards Drew VK4ZXI

https://qsl.net/bg6khc/pn2060c_phase_noise_analyzer.htm

My blog with a couple of posts on the PN2060A: https://vk4zxi.blogspot.com/

[simon_grimm]

Thank you Mr. VK4ZXI !