| Products > Test Equipment |
| philips pm3055 scope read serial data |
| (1/1) |
| david17:
Hi, thanks for reading this. I'm trying to read the data from the RS232 socket on the rear of the scope with python3. If I do ser_in = ser.readline() print(ser_in) I get lines of hex code starting with b'B\ then hex code. I have tried decode 'UTF8' I then get odd text and numbers scatted over the screen. baudrate of 2400 seams, better than 1200. I can not find any info in manual or online. I don't know what is being sent, is this maybe a waste of time anyway. Thanks for any help. |
| RAPo:
You can setup the rs232 settings (baud, parity etc) via the RS232 sofcal menu. Use Menu Fn-2 key. |
| ledtester:
Here's what I found in this manual: https://www.qsl.net/vk5bar/AHARS-Resources/Philips%20PM3055/Philips%20PM3055%20Operating%20Manual.pdf page 18: |
| david17:
Thanks, I never found that manual. So the 9 pin socket is not an RS232, it's a MAT 3220 Philips llc bus. Used for remote control. Thanks for your help. |
| DavidAlfa:
I have this scope, it doesn't have any smart functions like reporting data, measurements etc, it's purely for remote control. |
| Navigation |
| Message Index |