Products > Test Equipment
Phillips/Fluke PM3394 Combiscope Help
<< < (6/10) > >>
HighVoltage:
Here is the original FlukeView Software attached:

Download
Download the two zip files:
- FlukeView_Software-1.zip
- FlukeView_Software-2.zip
Unpack each ZIP file seperately

You will end up with 2 RAR file:
FlukeView_Software.part1.rar
FlukeView_Software.part2.rar

Unpack
Use WinRAR to unpack both files
use password: "HighVoltage"

You will end up with 1 ZIP file:
FlukeView_Software.zip
unpack this ZIP file and you will get two folder:

- FLUKE
- Fluke Ver 2 update

INSTALL
Copy the folder "FLUKE" to to C:\
Ending up with:
C:\FLUKE

Start the SETUP.EXE in the "Fluke Ver 2 update" folder
It will search for the FV33WIN.EXE in the "C:\FLUKE" folder and then update to v2 full version
Done!



HighVoltage:
Here are a few screen shots of the software:
AutogolazzoJr:
Thanks! May I use a 3 wire null modem cable to connect?
HighVoltage:

--- Quote from: AutogolazzoJr on January 28, 2018, 04:17:12 pm ---Thanks! May I use a 3 wire null modem cable to connect?

--- End quote ---

Yes, you can do that.
Make sure to use the settings in the screen shot for 3-Wire setup.
UTILITY > RS232 Setup

The PM3394B was the most stable one that supported full 38400 baud speed.
On the PM3394 and PM3394A you might need to slow down to get good results,
especially when you want to save and retrieve SETUP Data.

AutogolazzoJr:
I was waiting for my null modem cable and rs232 pci expander to motherboard header adapter when I got impatient and simply connected the scope rs232 directly to my motherboard with little jumper wires; it worked on the first try :). Thanks to all who helped.
Navigation
Message Index
Next page
Previous page
There was an error while thanking
Thanking...

Go to full version
Powered by SMFPacks Advanced Attachments Uploader Mod