Products > Test Equipment
Phillips/Fluke PM3394 Combiscope Help
<< < (7/10) > >>
AutogolazzoJr:
Sometimes the backup memory fails and my settings are lost. Is there a fix for this.
Also, I am looking to replace the bulb, possibly with an led bulb. Any drop-in for this? What bulb size?
DerKammi:

--- Quote from: AutogolazzoJr on February 04, 2018, 09:40:32 pm ---Sometimes the backup memory fails and my settings are lost. Is there a fix for this.
Also, I am looking to replace the bulb, possibly with an led bulb. Any drop-in for this? What bulb size?

--- End quote ---

Don't know about the back up, eneloops will be my next try. Nothing wrong with mine after I replaced almost all the el. caps and some cracked MKT's.

For the bulb I found one ebay advert which is gone now but it was the following description:

--- Quote --- T-1 (6mm) SX6s Midget Flange. Midget flange T1-3/4 indcandescent bulbs.
28V, 80mA, diameter 5.84mm, T1 3/4, length 16.1mm, clear lens colour, 10lm, 2000h.

--- End quote ---
AutogolazzoJr:
So, using rechargeable batteries will help with the backup???? What are mkts?
HighVoltage:
A new pair of alkaline batteries will last normally 10 years in these scope, unless they are bad types and leak.
I still have some of these PM3394B with original Philips batteries and they are still OK.
 
DerKammi:

--- Quote from: AutogolazzoJr on February 05, 2018, 02:58:02 pm ---So, using rechargeable batteries will help with the backup???? What are mkts?

--- End quote ---

MKT capacitors, 2 of them on the digitizer board had cracks in them.
Navigation
Message Index
Next page
Previous page
There was an error while thanking
Thanking...

Go to full version
Powered by SMFPacks Advanced Attachments Uploader Mod