EEVblog Electronics Community Forum

Products => Test Equipment => Topic started by: doktor pyta on March 22, 2016, 10:59:08 am

Title: Picoscope 6000 series PSU
Post by: doktor pyta on March 22, 2016, 10:59:08 am
Hi,
Is there any Picoscope 6000 series user here?
I have one without a power supply.
From the manual I know it should provide 12VDC, 4A, center positive.
From my observations it uses 2,1/5,5 DC power connector.

Should the PSU have output negative connected directly to the PE in the AC mains plug ? (I can buy PSU with and without this link).
Could someone send a closer picture of the original PSU?

Thanks!
Title: Re: Picoscope 6000 series PSU
Post by: ADT123 on March 22, 2016, 01:27:54 pm
Does this help?

https://www.picotech.com/accessories/miscellaneous/ac-adaptor-12-v (https://www.picotech.com/accessories/miscellaneous/ac-adaptor-12-v)

2 pin adaptors so not connected to ground.
Title: Re: Picoscope 6000 series PSU
Post by: doktor pyta on March 22, 2016, 02:16:44 pm
Yes, thanks!
However a closer picture would also be useful :)