Products > Test Equipment
Picoscope Hack
narkeleptk:
--- Quote from: hugo on July 13, 2024, 02:07:10 am ---We do know that some of the 2204A models can be upgraded to the 2205A, however I do believe that 2406B model is a totaly different species (different size and hardware) so no upgrade will be possible ...
--- End quote ---
Con confirm. I have a 2205 and 2206 and they are completely different despite the external case looking similar.
XanderL73:
Glad to hear that it is hardware related. It at least means that I most likely understood how it should be done, it just isn’t possible. The upside is I learned a new skill ;)
I bought the cheapest 4 channel basically for myself and have at the moment no specific use for higher bandwidth. It is mainly to see if it works better than my old tiepie and labnation. That last one had some serious potential, but the company never continued development of the software other than bugfixes. The tiepie I got like 15 years ago at work, but I believe it is only 2 channels and 5 or 10Mhz and is now a bit outdated for the newer hardware we use. Since it still works it is a bit hard to convince the boss that we need something new. In the latest hardware we delivered we use encoders with 4 signals, hence the 4 channels. I had one encoder that turned out to be wonky, but to prove that I had to make many measurements by combining 2 channels at a time. With 4 channels I can check this in 1 go. If I can order a new one for work I’ll ask for a 50Mhz, 4 channel (that would be a B-version).
MiDi:
--- Quote from: MiroS on June 14, 2024, 07:16:23 am ---
--- Quote from: unseenninja on June 12, 2024, 07:08:47 pm ---
--- Quote from: MiDi on December 19, 2023, 07:07:50 pm ---Had no problems to hack 2204A (HW Version 17, cal 2023-04-17) to 2205A
--snip--
--- End quote ---
Thanks for the clear instructions. Worked a treat for me too!
(Attachment Link)
--- End quote ---
My serial is ending with zero J****/**30 , if I change it to J****/**29 - hack does not work, if I decrease last digit in number J****/**30 by 1 so it will be last digit hex 29 so not a number anymore ( 0 is hex 30).
Is there any way for such case?
--- End quote ---
No need to change the last digit, just change one digit of the SN.
Navigation
[0] Message Index
[*] Previous page
Go to full version