Products > Test Equipment
Pintech HVP 39pro (HVHF scope probe)
(1/1)
Plow:
The Pintech HVP 39Pro is a <40kV 50MHz oscilloscope probe.

The first small flyback transformer is driven by a 12v 16kHz 40% duty DC square wave.

The second is a 50Hz 240v 6kV bug zapper transformer and driven with a 50Hz "modified sine" wave inverter (stepped AC square wave approximating a sine wave).

The frequency and voltage checks true based on spark gap but I have no idea what the waveform should look like, is this what you'd expect?
Plow:
I tested it against the 10x probe in left column, 1000x probe in right column.
Navigation
Message Index
There was an error while thanking
Thanking...

Go to full version
Powered by SMFPacks Advanced Attachments Uploader Mod