Products > Test Equipment

Possible GW Instek GDS-1000B hack

<< < (15/52) > >>

Mortymore:

--- Quote from: Gazmon on March 11, 2019, 06:16:12 pm ---
... 200mhz (scope says its upgraded to this in system info)...

--- End quote ---

What scope exactly do you have?
Can you add a photo please? (or a screen capture of the System info, with the serial number blurred)

It's just that if you have a 1000B, I wasn't expecting it to reach 200MHz. I'm intrigued now  :-//

About the SA option (Spectrum Analyser) that nctnico is talking about, if it's available, you can access it with the "OPTION" button on the lower right corner near LCD screen (below "Menu off" button).

Gazmon:
photo attached, I have the 1102b 2 channel version

Serial decoding works but is not available for the parallel and SPI options it seems which is a bit disappointing

any idea what power analysis is, I didn't install this tbh


And the option button still does not do anything on my scope after the upgrades I did

Still pretty good scope after the hack

nctnico:
Parallel is for digital channels only and SPI is only available on 4 channel models because you need 4 signals (clock, sel, MISO and MOSI) for SPI.

Gazmon:
Ok thats sorts that out, really just need to do a bandwidth check on the so called 200mhz that my scope claims to have now

being fairly new to all this what the easiest way to do this ?

any help appreciated

Mortymore:

--- Quote from: Gazmon on March 11, 2019, 10:20:05 pm ---
any idea what power analysis is, I didn't install this tbh


--- End quote ---

All I can tell is that power analysis is available for GDS-3000 Series, and it didn't work for me on the 2000E.
If that's just a matter of software or some hardware may be needed, I don't know. A current clamp for scope could be bought separately to deal with current, but I never look for intel on what could be holding the 1000B and 2000E so they can't have the power analysis option working.

Navigation

[0] Message Index

[#] Next page

[*] Previous page

There was an error while thanking
Thanking...
Go to full version
Powered by SMFPacks Advanced Attachments Uploader Mod