Products > Test Equipment
power FINSRI 1014D
(1/1)
lagonbleu:
HI , and good year !

Hello everyone I make a mistake when i put  12v power DC  on finsri 1014d :
Because i don't have US adaptator , then i use 5v DC but nothing !!!
With 12v  ok ,but after some tests  , lights freeze and commands  inopĂ©rante  ....
I found Chip HS (burns )  :  TS 61041   (U15)  TEXAS INSTRUMENT ?
I want  to change bus this is CMS 6 broche . I find only 5 broches ...
Does anyone  can tell me where i  find this ? 
very thanks Schematic_Scope 1014D_2022-05-10.pdf (884.84 kB - downloaded 32 times.)
pcprogrammer:
According to the datasheet you can probably also use the TPS61040. Has a higher internal switch current limit, so not sure if that will be a problem.

https://www.ti.com/lit/ds/symlink/tps61041.pdf?ts=1673695286067&ref_url=https%253A%252F%252Fwww.google.com%252F

It is always a risk when buying of Aliexpress. Here is a link to a shop selling them.

https://nl.aliexpress.com/item/32965120446.html
Navigation
Message Index
There was an error while thanking
Thanking...

Go to full version
Powered by SMFPacks Advanced Attachments Uploader Mod