Products > Test Equipment
power FINSRI 1014D
(1/1)
lagonbleu:
HI , and good year !
Hello everyone I make a mistake when i put 12v power DC on finsri 1014d :
Because i don't have US adaptator , then i use 5v DC but nothing !!!
With 12v ok ,but after some tests , lights freeze and commands inopérante ....
I found Chip HS (burns ) : TS 61041 (U15) TEXAS INSTRUMENT ?
I want to change bus this is CMS 6 broche . I find only 5 broches ...
Does anyone can tell me where i find this ?
very thanks Schematic_Scope 1014D_2022-05-10.pdf (884.84 kB - downloaded 32 times.)
pcprogrammer:
According to the datasheet you can probably also use the TPS61040. Has a higher internal switch current limit, so not sure if that will be a problem.
https://www.ti.com/lit/ds/symlink/tps61041.pdf?ts=1673695286067&ref_url=https%253A%252F%252Fwww.google.com%252F
It is always a risk when buying of Aliexpress. Here is a link to a shop selling them.
https://nl.aliexpress.com/item/32965120446.html
Navigation
[0] Message Index
Go to full version