Products > Test Equipment
Powerbanks tested with DHO800/900
Houseman:
--- Quote from: DaneLaw on January 10, 2024, 04:52:34 am ---
--- Quote from: Proxy64 on January 06, 2024, 07:16:00 am ---Anker 737 24,000mAh (powercore 24k) FAILED !
--- End quote ---
It is a shame if your Anker737 dont work with your Rigol, as the Anker737 (Powercore24 A1289) does seem to work with the newer Rigol products, but it could be they changed something from the older Rigol products to the newer Rigol models.
--- End quote ---
I can CONFIRM that even if new generation IT DOES NOT WORK with RIGOL DHO914.
Even 140W Seires 7 Generation 2 these beefy PB does freeze the Rigol at startup since cannot go beyond 20W. EITHER plugged in C1 and in C2 jacks. See attach
DO NOT BUY IT.
I am asking before claiming for refund if Anker will release a new firmware for this item...
DaneLaw:
--- Quote from: Houseman on February 13, 2024, 10:18:54 am ---
--- Quote from: DaneLaw on January 10, 2024, 04:52:34 am ---
--- Quote from: Proxy64 on January 06, 2024, 07:16:00 am ---Anker 737 24,000mAh (powercore 24k) FAILED !
--- End quote ---
It is a shame if your Anker737 dont work with your Rigol, as the Anker737 (Powercore24 A1289) does seem to work with the newer Rigol products, but it could be they changed something from the older Rigol products to the newer Rigol models.
--- End quote ---
I can CONFIRM that even if new generation IT DOES NOT WORK with RIGOL DHO914.
Even 140W Seires 7 Generation 2 these beefy PB does freeze the Rigol at startup since cannot go beyond 20W. EITHER plugged in C1 and in C2 jacks. See attach
DO NOT BUY IT.
I am asking before claiming for refund if Anker will release a new firmware for this item...
--- End quote ---
Not sure what Rigol had in mind with their DHOxxx line, and could look like they placed themself between two chairs 12V PD & 15V PD
As mentioned newer products from Rigol, using the same form factor, works on all the high current powerbanks I got access to.
An example of the start-up cycle stays constantly in 15v PD.
--- End quote ---
--- End quote ---
You can obviously decoy trigger a locked 15V PD, then it should work according to the info on page1.
What I do with my Micsig scope that doesnt have native PD, so can use most of these PD powerbanks with that unit.
Proxy64:
@Houseman you can use a board like this one, to trig 15V/3A
Maybe there is version with USB-C male to USB-C female, I don’t know.
And you know, I don’t think Anker is guilty in this case with the Rigol DHO800/900
https://www.aliexpress.com/item/1005006445099579.html?spm=a2g0o.productlist.main.3.6e495d53bv2LjW&algo_pvid=3a6a6fd9-8e3f-4010-960e-0ff2517fb9c0&algo_exp_id=3a6a6fd9-8e3f-4010-960e-0ff2517fb9c0-1&pdp_npi=4%40dis%21THB%21120.29%2136.07%21%21%2123.38%217.01%21%402103297517078804100556610e3c2e%2112000037191871056%21sea%21TH%21121161211%21&curPageLogUid=oWh0sN5vfrCx&utparam-url=scene%3Asearch%7Cquery_from%3A
Proxy64:
Here a test with a PD trigger board to use an Anker powerbank to power a DHO800/900.
https://youtu.be/CBg0HLug-W4?si=Qaa56oDNEBTkxZSL
edit: Note that the FNB58 is only here to display the voltage and power.
Proxy64:
Based on to this video Shargeek Storm2 works
https://youtu.be/TXL916et9_Y?si=ufldtgFa_a2auhS4
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version