Author Topic: Hacking the $18 Fnirsi DSO152 portable oscilloscope  (Read 253 times)

0 Members and 2 Guests are viewing this topic.

Offline david.givenTopic starter

  • Contributor
  • Posts: 28
  • Country: ch
Hacking the $18 Fnirsi DSO152 portable oscilloscope
« on: Yesterday at 09:15:39 am »
Warning: I made this.



As a 200kHz oscilloscope I don't think it's worth much, but as a CH32F103-based Blue pill development board in a nice case with a high-bandwidth screen, battery and charger and USB-C, it's potentially pretty useful.

I've since found out that Fnirsi make the DSO153, which is an upgraded model with signal generation support. This looks similar but has a different microcontroller and a more complex board and, obviously, an output analogue stage. I can't get a good picture of what the microcontroller is but it's likely to be an upgraded CH32F. It's another $10 more expensive, which takes it out of the sub-$20 sweet spot of being-cheap-enough-to-buy-as-a-component that the DSO152 is in, but if anyone does want to build a custom diagnostic tool it might still be worth a look...
 
The following users thanked this post: Kim Christensen

Online Atlan

  • Frequent Contributor
  • **
  • Posts: 327
  • Country: sk
Re: Hacking the $18 Fnirsi DSO152 portable oscilloscope
« Reply #1 on: Yesterday at 07:09:30 pm »
One pin is enough for programming ? I program the CH32v003 via the SWDIO pin.
FNIRSI 1013D Always provide a picture or video with the problem where the parameters of the oscilloscope are visible, and a picture of the diagnostic screen with the values.
 


Share me

Digg  Facebook  SlashDot  Delicious  Technorati  Twitter  Google  Yahoo
Smf