FY3200S Signal Generator from FeelTech

[joey]

Hi,

I just bought a FY3200S dual channel 24MHz sig gen from Feeltech and it works very well.
I have installed the interface software but it is in Chinese.  I cannot for the life of me
switch it back to English nor can I find any other download either on the web or on the mini CD that
came with the device to get the English download.  Can anyone help with this?

Thanks so much.
Joey.

[pascal_sweden]

I started a whole thread about this in May: (with over 10.000 views in the mean time)
https://www.eevblog.com/forum/testgear/feeltech-fy3224s-24mhz-2-channel-dds-aw-function-signal-generator/msg669867/#msg669867

[wlathan]

I would like to have a copy of the software. My FY3200S, 24MHz (approx. $80 at Banggood.com) arrived today with a small CD with various files on it. However, I could neither copy nor read the files because of the (assumed) Chinese characters in the file names. These names have one of more question marks on my Windows machine. I was able to find the users guide on the net and a driver on Windows was loaded for the device. However, I have been unable to find the software to be loaded on the PC. I assume it is the file named "FY3200?? V2.2.exe" on the CD. Could someone please send me file with the invalid characters removed from the file name. I wrote to customer service at Banggood where I purchased the unit, but my success rates from China-based customer service departments are not good.

Many thanks,

Bill

[Wiesel]

Hi Bill,
on page 6 of the above linked thread are two links 

... Get it via this link:
FY3200S Software

...I put the CD to the web, your file seems to be here:

<http://shor.ch/software/FY3224S-arb_gen/FY3200S%20User%20Guide/PC%20Software/>

hope this helps, Daniel

[wlathan]

I was just sent the following link to the "latest" FeelTech software: https://copy.com/0ixUecbnBCn7AW2x

I was delighted to see that the version of the PC software is 2.2, and it is an English version! Now if I can just figure out how to use it. Short on instructions.

Thanks to all who helped me,

Bill

[Orion12]

I was just sent the following link to the "latest" FeelTech software: https://copy.com/0ixUecbnBCn7AW2x

I was delighted to see that the version of the PC software is 2.2, and it is an English version! Now if I can just figure out how to use it. Short on instructions.

Thanks to all who helped me,

Bill

Many Thanks for the 2.2 Version link Bill . . .
About a month ago I messaged FeelTech Technical Support off their website but had not heard anything . . . Evidently they were busy getting an "English" version ready . . .

I've been using my FeelTech FY3200S / FY3224S for a few months now & find it quite useful for a variety of tasks . . . It's Dual Outputs with it's Adjustable Phase Relationship functions work well & in general it's a Pretty Versatile Arbitrary Function Signal Generator . . . The Frequency Counter is a Plus . . . Amazing piece of Test Gear for < $80.

Best Holiday Seasons with Cheers from Orion12 

[bobofrut]

Hi everybody!
I have recently bought on the aliexpress the FY3224S rev. 2, unfortunately it came to me without the CD, so I don't have possibility to upload my own waves.
If someone has the software for the FY3200S family, please could you share it?
Sincerely yours,
bobofrut

[CustomEngineerer]

Hi everybody!
I have recently bought on the aliexpress the FY3224S rev. 2, unfortunately it came to me without the CD, so I don't have possibility to upload my own waves.
If someone has the software for the FY3200S family, please could you share it?
Sincerely yours,
bobofrut

Is it not the software Wiesel linked to a couple of posts above yours?