Products > Test Equipment
Quadtech 1659 RLC DigiBridge project
<< < (3/5) > >>
DavidAzulay5000:
YES
the psu is a SMP 
I rebuilt the power supply.
I made a lot of changes to the circuit
In order to give as clean a voltage as possible to the main board.
I made dozens of changes to 1659
As it is accurate at the level of metrological equipment.
I do a lot of projects on improving and calibrating measuring equipment
and design
and build measuring equipment.
If I have the muse in the future I will post more posts
I'm too lazy to upload photos here because you can only upload 10 photos at a time
For each of my projects I take hundreds of photos of the electrical circuits
I usually post my projects only on my facebook
My profile is private
So those who are not on my friends list cannot see them
precaud:
I think more pictures are needed, there's still remaining bandwidth to be consumed...
DavidAzulay5000:
 :-DD
mawyatt:
Nice restoration work!! The Tek input hybrid reminds of our repair!

Best,
DavidAzulay5000:

--- Quote from: mawyatt on January 21, 2023, 03:20:58 pm ---Nice restoration work!! The Tek input hybrid reminds of our repair!

Best,

--- End quote ---

I have 3 oscilloscopes
of TEK
2 of 2445
and 1 of 2465
I got all three broken
And I fixed and calibrated them all
On Facebook I have over 500 photos on the project about them
Navigation
Message Index
Next page
Previous page
There was an error while thanking
Thanking...

Go to full version
Powered by SMFPacks Advanced Attachments Uploader Mod