Products > Test Equipment
Question about SIGLENT SDS1202 CNL+
<< < (3/5) > >>
asupsp700:
ETA2: In China Siglent Headquarter side: SDS1000CNL+  last FW version is: V6.01.01.21R2
date 2020-06-03  But this need look carefully because now I do not know if this FW is localised to China.
[/quote]

So this seems to be for the СML+ version and not the СNL+ version?



asupsp700:
Here's what else I found on the Internet :)


tautech:

--- Quote from: asupsp700 on October 02, 2023, 11:21:47 am ---Thank you. The oscilloscope is working fine. I just want to know if new firmware has been released with new functions

--- End quote ---
This I doubt, only with bug fixes.
When we look at HQ website, 200 MHz SDS1202CNL+ is indeed 2 GSa/s but only with 40 kPts mem depth, like all other CNL+ models.
https://int.siglent.com/products-overview/sds1000cnl/
HQ firmware page
https://int.siglent.com/download/firmwares/?ProId=41
Also lists 5.01.02.32 firmware.
https://int.siglent.com/upload_file/zip/firmware/Oscilloscope/SDS1000CML_SSP_V100R005B01D02P32.zip

However it is interesting the above is listed as 5.01.02.32 CML firmware but I do not think this is an error as some recovery packages we have can be used for CNL and CML models.
Therefore I believe 5.01.02.32 firmware is correct for SDS1202CNL+.
If not the checksum should reject installation.
asupsp700:
Are you telling me that I won't break my oscilloscope if I try to install the wrong firmware? Will the bootloader check the checksum and if it does not match, will it stop the firmware process?
tautech:

--- Quote from: asupsp700 on October 02, 2023, 06:56:40 pm ---Are you telling me that I won't break my oscilloscope if I try to install the wrong firmware? Will the bootloader check the checksum and if it does not match, will it stop the firmware process?

--- End quote ---
It should.
However if you would rather play it safe wait until next week when we can have advice from HQ tech support.
Email to HQ sent.
Navigation
Message Index
Next page
Previous page
There was an error while thanking
Thanking...

Go to full version
Powered by SMFPacks Advanced Attachments Uploader Mod