Products > Test Equipment

Question about SIGLENT SDS1202 CNL+

<< < (3/5) > >>

asupsp700:
ETA2: In China Siglent Headquarter side: SDS1000CNL+  last FW version is: V6.01.01.21R2
date 2020-06-03  But this need look carefully because now I do not know if this FW is localised to China.
[/quote]

So this seems to be for the СML+ version and not the СNL+ version?



asupsp700:
Here's what else I found on the Internet :)


tautech:

--- Quote from: asupsp700 on October 02, 2023, 11:21:47 am ---Thank you. The oscilloscope is working fine. I just want to know if new firmware has been released with new functions

--- End quote ---
This I doubt, only with bug fixes.
When we look at HQ website, 200 MHz SDS1202CNL+ is indeed 2 GSa/s but only with 40 kPts mem depth, like all other CNL+ models.
https://int.siglent.com/products-overview/sds1000cnl/
HQ firmware page
https://int.siglent.com/download/firmwares/?ProId=41
Also lists 5.01.02.32 firmware.
https://int.siglent.com/upload_file/zip/firmware/Oscilloscope/SDS1000CML_SSP_V100R005B01D02P32.zip

However it is interesting the above is listed as 5.01.02.32 CML firmware but I do not think this is an error as some recovery packages we have can be used for CNL and CML models.
Therefore I believe 5.01.02.32 firmware is correct for SDS1202CNL+.
If not the checksum should reject installation.

asupsp700:
Are you telling me that I won't break my oscilloscope if I try to install the wrong firmware? Will the bootloader check the checksum and if it does not match, will it stop the firmware process?

tautech:

--- Quote from: asupsp700 on October 02, 2023, 06:56:40 pm ---Are you telling me that I won't break my oscilloscope if I try to install the wrong firmware? Will the bootloader check the checksum and if it does not match, will it stop the firmware process?

--- End quote ---
It should.
However if you would rather play it safe wait until next week when we can have advice from HQ tech support.
Email to HQ sent.

Navigation

[0] Message Index

[#] Next page

[*] Previous page

There was an error while thanking
Thanking...
Go to full version
Powered by SMFPacks Advanced Attachments Uploader Mod