Products > Test Equipment
Question about SIGLENT SDS1202 CNL+
<< < (4/5) > >>
asupsp700:
Yes. I will definitely wait for a response from the main office. I don't want to break the device...
rf-loop:

--- Quote from: asupsp700 on October 02, 2023, 06:32:12 pm ---Here's what else I found on the Internet :)


--- End quote ---

This IS interesting. Just same FW version number (LeCroy what also sell rebranded Siglent made oscilloscopes).
Do you have owned it from new... if not, who have updated FW previously, or is this current FW in your scope just as it have been from factory.
asupsp700:
I'm the second owner of the oscilloscope, but I don't think anyone has updated the firmware before me. Since I found another person who has the same model and the same firmware version....
https://www.reddit.com/r/AskElectronics/comments/136jpq7/trying_to_find_firmware_for_siglent_sds_1202cnl/
tautech:

--- Quote from: asupsp700 on October 02, 2023, 07:02:42 pm ---Yes. I will definitely wait for a response from the main office. I don't want to break the device...

--- End quote ---
HQ confirmed 2.06.02.19 is the correct and latest version.
tv84:

--- Quote from: tautech on October 07, 2023, 07:22:24 am ---
--- Quote from: asupsp700 on October 02, 2023, 07:02:42 pm ---Yes. I will definitely wait for a response from the main office. I don't want to break the device...

--- End quote ---
HQ confirmed 2.06.02.19 is the correct and latest version.

--- End quote ---

And where can it be downloaded?

The last FW that I ever saw was SDS1000A_6.01.01.21R2.ADS (CRC32: DEA426D9), that can be flashed in a CNL+ or CML+.
Navigation
Message Index
Next page
Previous page
There was an error while thanking
Thanking...

Go to full version
Powered by SMFPacks Advanced Attachments Uploader Mod