Products > Test Equipment
Question about SIGLENT SDS1202 CNL+
<< < (5/5)
tautech:

--- Quote from: tv84 on October 07, 2023, 08:50:47 am ---
--- Quote from: tautech on October 07, 2023, 07:22:24 am ---
--- Quote from: asupsp700 on October 02, 2023, 07:02:42 pm ---Yes. I will definitely wait for a response from the main office. I don't want to break the device...

--- End quote ---
HQ confirmed 2.06.02.19 is the correct and latest version.

--- End quote ---

And where can it be downloaded?

The last FW that I ever saw was SDS1000A_6.01.01.21R2.ADS (CRC32: DEA426D9), that can be flashed in a CNL+ or CML+.

--- End quote ---
Nowhere apparently.  :-//
Guessing it's for the last CNL+ HW version/s and was told it is only a CNL+ version.
asupsp700:

--- Quote from: tautech on October 07, 2023, 07:22:24 am ---
--- Quote from: asupsp700 on October 02, 2023, 07:02:42 pm ---Yes. I will definitely wait for a response from the main office. I don't want to break the device...

--- End quote ---
HQ confirmed 2.06.02.19 is the correct and latest version.

--- End quote ---
Thank you very much for the information. The issue with searching for new firmware can be closed...
asupsp700:

--- Quote from: tv84 on October 07, 2023, 08:50:47 am ---
--- Quote from: tautech on October 07, 2023, 07:22:24 am ---
--- Quote from: asupsp700 on October 02, 2023, 07:02:42 pm ---Yes. I will definitely wait for a response from the main office. I don't want to break the device...

--- End quote ---
HQ confirmed 2.06.02.19 is the correct and latest version.

--- End quote ---

And where can it be downloaded?

The last FW that I ever saw was SDS1000A_6.01.01.21R2.ADS (CRC32: DEA426D9), that can be flashed in a CNL+ or CML+.

--- End quote ---

Have you SDS1000A_6.01.01.21R2.ADS seen her on the screen SDS1202 CNL+?
tv84:

--- Quote from: asupsp700 on October 08, 2023, 09:41:00 am ---Have you SDS1000A_6.01.01.21R2.ADS seen her on the screen SDS1202 CNL+?

--- End quote ---

I haven't but since it's a SDS1000A type it should work.
asupsp700:
I won’t risk updating my oscilloscope.... If something doesn’t work out, I’ll be left without the device  :-BROKE.
Navigation
Message Index
Previous page
There was an error while thanking
Thanking...

Go to full version
Powered by SMFPacks Advanced Attachments Uploader Mod