Author Topic: What every lab needs - A Bluetooth Speaker/Multimeter  (Read 2056 times)

0 Members and 1 Guest are viewing this topic.

Offline EEVblogTopic starter

  • Administrator
  • *****
  • Posts: 37717
  • Country: au
    • EEVblog
What every lab needs - A Bluetooth Speaker/Multimeter
« on: September 18, 2019, 04:37:32 am »
Oh dear...


 
The following users thanked this post: 001

Offline Brumby

  • Supporter
  • ****
  • Posts: 12297
  • Country: au
Re: What every lab needs - A Bluetooth Speaker/Multimeter
« Reply #1 on: September 18, 2019, 04:41:53 am »
 :palm:  Oh, save me.
 

Offline maxwell3e10

  • Frequent Contributor
  • **
  • Posts: 869
  • Country: us
Re: What every lab needs - A Bluetooth Speaker/Multimeter
« Reply #2 on: September 18, 2019, 05:28:22 am »
Some people like to play music in the lab and this justifies purchasing it as a multimeter. Plus it can be handy to have the mute button right there.
 
The following users thanked this post: 001

Offline MosherIV

  • Super Contributor
  • ***
  • Posts: 1530
  • Country: gb
Re: What every lab needs - A Bluetooth Speaker/Multimeter
« Reply #3 on: September 18, 2019, 07:00:38 am »
Quote
bluetooth makes everything better
Wolowitz

 ;)

10 out 10 for trying a new product.  :horse:
 

Offline wilfred

  • Super Contributor
  • ***
  • Posts: 1252
  • Country: au
Re: What every lab needs - A Bluetooth Speaker/Multimeter
« Reply #4 on: September 18, 2019, 07:14:45 am »
If a factory in China makes Multimeters on one assembly line and bluetooth speakers on another line it is inevitable that sooner or later the two will cross breed and generate a mutant hybrid. There are endless examples of such mutations. It is not even complete products merging. there can be parasitic infestation like coloured LEDs where none should be, or USB ports or worse micro SD card slots or Solar panels.

It has been happening for decades. Who remembers the DMM/calculator?  Some hybrids run rampant and take over completely like weeds. It was genius to add a phone to a camera.
 

Offline chickenHeadKnob

  • Super Contributor
  • ***
  • Posts: 1055
  • Country: ca
Re: What every lab needs - A Bluetooth Speaker/Multimeter
« Reply #5 on: September 18, 2019, 01:03:23 pm »
I used to work with a tech, a big hulking brute sized individual, who would sit in his chair quietly stroking and polishing his Widlarizer  if you casually wanted to inflict your taste in music on his ears.  :-DD

to quote mister T "I pity da fool"
 

Offline dcbrown73

  • Regular Contributor
  • *
  • Posts: 105
  • Country: us
Re: What every lab needs - A Bluetooth Speaker/Multimeter
« Reply #6 on: September 18, 2019, 01:19:12 pm »
Based on the comment about bluetooth makes everything better.  The next big technological leap is...



...and to think. I didn't think hot sauce could get much better!
Why exactly do people feel I should have read their post before I responded?  As if that was necessary for me to get my point across.
 
The following users thanked this post: Zucca

Offline 001

  • Super Contributor
  • ***
  • Posts: 1170
  • Country: aq
Re: What every lab needs - A Bluetooth Speaker/Multimeter
« Reply #7 on: September 18, 2019, 05:49:50 pm »
It looks amasing
Great deal for about $50
I`m gonna buy one
 

Offline boggis the cat

  • Regular Contributor
  • *
  • Posts: 218
  • Country: nz
Re: What every lab needs - A Bluetooth Speaker/Multimeter
« Reply #8 on: September 19, 2019, 12:42:31 am »
Oh dear...
Sure, that's a great idea and all, but... does it have a standard headphone jack?

I can't work effectively without another cable running across the desk.

(Starts working on top secret record-player / oscilloscope hybrid project...)
 

Offline rjp

  • Regular Contributor
  • *
  • Posts: 124
  • Country: au
Re: What every lab needs - A Bluetooth Speaker/Multimeter
« Reply #9 on: September 19, 2019, 05:41:50 am »
Its awesome, you lot have no taste.
The only possible improvement would be RGB lighting.

 More seriously, for the tiny hobbiest setup, having multiple DMM's for the moments you need to track Volts and Amps, this makes the secondary one somewhat more space saving.
« Last Edit: September 19, 2019, 05:44:36 am by rjp »
 

Offline Zucca

  • Supporter
  • ****
  • Posts: 4306
  • Country: it
  • EE meid in Itali
Re: What every lab needs - A Bluetooth Speaker/Multimeter
« Reply #10 on: September 19, 2019, 06:51:10 am »
RGB lighting

That's another cancer for humanity.
Can't know what you don't love. St. Augustine
Can't love what you don't know. Zucca
 

Offline hopski

  • Regular Contributor
  • *
  • Posts: 50
  • Country: gb
Re: What every lab needs - A Bluetooth Speaker/Multimeter
« Reply #11 on: September 19, 2019, 07:32:25 am »
I'm sure everyone on the TEA thread will consider it a "requirement" in the lab.  ;D
 
The following users thanked this post: 001

Offline coromonadalix

  • Super Contributor
  • ***
  • Posts: 5854
  • Country: ca
Re: What every lab needs - A Bluetooth Speaker/Multimeter
« Reply #12 on: September 19, 2019, 10:20:26 am »
A link for this thing ??
 
The following users thanked this post: 001

Online coppice

  • Super Contributor
  • ***
  • Posts: 8635
  • Country: gb
Re: What every lab needs - A Bluetooth Speaker/Multimeter
« Reply #13 on: September 19, 2019, 10:58:22 am »
That looks like the kind of product the Japanese would have made in the 1990s. They loved wacky combinations of functions, but few ever reached outside Japan.
 
The following users thanked this post: 001

Offline 001

  • Super Contributor
  • ***
  • Posts: 1170
  • Country: aq
Re: What every lab needs - A Bluetooth Speaker/Multimeter
« Reply #14 on: September 19, 2019, 04:50:16 pm »
The idea is great
someone here rehouse his Aneng Q1 as a  bench meter  yet

PROS:
1 BIG   DISPLAY
2 DIRECT ONE BUTTON SELECTION 
3 10Watts  buzzer

CONS:
1 INVERTED DISPLAY sucks
2 LASY BARGRAPH
3 Buzzer must be doubled with quick flash light for a loud work envierements
« Last Edit: September 19, 2019, 05:11:26 pm by 001 »
 

Offline AVGresponding

  • Super Contributor
  • ***
  • Posts: 4655
  • Country: england
  • Exploring Rabbit Holes Since The 1970s
Re: What every lab needs - A Bluetooth Speaker/Multimeter
« Reply #15 on: September 19, 2019, 04:56:21 pm »
Until it can provide me with a happy ending and make a cup of tea afterwards, I'll keep my money in my pocket thanks
nuqDaq yuch Dapol?
Addiction count: Agilent-AVO-BlackStar-Brymen-Chauvin Arnoux-Fluke-GenRad-Hameg-HP-Keithley-IsoTech-Mastech-Megger-Metrix-Micronta-Racal-RFL-Siglent-Solartron-Tektronix-Thurlby-Time Electronics-TTi-UniT
 


Share me

Digg  Facebook  SlashDot  Delicious  Technorati  Twitter  Google  Yahoo
Smf