| Products > Test Equipment |
| Quick Question regarding the (600 mA range) Fuse of a Brymen BM869s |
| (1/2) > >> |
| kblue:
Greetings! Due to my own fault (forgot to change the probes into the amp-socket) i blow the fuse in the mA-range while measuring more than 1 amp. Ordered a new one but wasn't able to find the "original". The original is "red" and has the letter "B" in the name. While the other one is blue, has no "B" but appears to be the same. Are they? Or has the "B" variant something to do with the ability to measure 600 mA with a 440 mA Fuse? Thanks in advance! |
| Fungus:
Here's the datasheet. https://www.eaton.com/content/dam/eaton/products/electrical-circuit-protection/fuses/data-sheets/bus-ele-ds-1047-dmm-b.pdf Look at the graph, it won't actually blow at 440mA. It needs over 1.25A to have any chance of blowing at all. :) This is the way with fuses. They all need much more than the rated current to blow them. (Think: It's supposed to be perfectly happy at 440mA under all conditions) |
| floobydust:
The Bussmann "B" question was raised back in a 2015 thread: https://www.eevblog.com/forum/testgear/difference-between-bussmann-fuses-dmm-b-44-100-x-dmm-44-100 Seems to be (pun intended) RoHS or Fluke specific p/n but no difference. These fuses are counterfeited galore, shake them next to your ear to hear the sand inside, weigh them, measure their resistance etc. |
| Fungus:
Yes, be VERY careful where you buy them. They're counterfeited to hell and back. If you're a hobbyist you could look in the official Fluke store in Amazon, they're reasonably priced there. |
| IanB:
--- Quote from: Fungus on August 02, 2024, 08:42:55 pm ---Look at the graph, it won't actually blow at 440mA. It needs over 1.25A to have any chance of blowing at all. :) --- End quote --- Well, it depends on both current and time. I blew the fuse in a fraction of a second when I inadvertently tried to measure the current through a 60 W incandescent bulb (500 mA). The switch on current was apparently far more than the fuse could sustain. |
| Navigation |
| Message Index |
| Next page |