| Products > Test Equipment |
| Range selector of Metrahit multimeter sticks. WHY? |
| << < (3/3) |
| Finderbinder:
--- Quote from: RobinLox on June 12, 2023, 01:57:23 pm ---Hey there, I have taken A LOT of those meters apart. These marks here are not normal. The springs or the 3mm steel balls used to click the selector in the specific positions might be deformed. Could you provide pictures of the springs? If they are not deformed, try a tiny bit of vaseline at exactly this surface and the edges on the sides. Only a very small amount. --- End quote --- These marks left after incorrect assembly. The second attempt was successful :) |
| Navigation |
| Message Index |
| Previous page |