| Products > Test Equipment |
| 121GW App Testing |
| << < (23/38) > >> |
| Seppy:
--- Quote from: rs20 on June 20, 2018, 01:58:28 am --- --- Quote from: Seppy on June 20, 2018, 01:33:24 am --- --- Quote from: rs20 on June 20, 2018, 01:28:35 am --- --- Quote from: Seppy on June 20, 2018, 01:17:54 am ---Yes that looks good, but I don't think log scale works well with pinch to zoom, would have to be linear, otherwise zooming into the the start of a large data set would be horrid. --- End quote --- ??? Where is a log scale mentioned anywhere? The only thing that is log is the animation I did (to show a few seconds and a few days in a single animation consistently), but that has nothing to do with the implementation of the axes ticks and in-app behaviour. --- End quote --- t = 0:0.01:200; y = sin(t); ^ That is a linearly sampled function, the plot displays a log scaled function. The function linearly scaled should look like the attached: --- End quote --- Nono, ignore that. That's just to make the blue curve in the plot look interesting when scaled hugely. Don't look at the blue curve at all if it's confusing you; the behaviour of the tick marks on the axis (which clearly aren't a log scale) is what's actually being demonstrated here. x is time (in seconds), y is voltage. Sorry, didn't expect people to be inspecting that part of the code. --- End quote --- No worries, thanks for the code it will help. But it will be a few versions before this makes it into the App. |
| IanB:
--- Quote from: Seppy on June 20, 2018, 02:00:20 am ---No worries, thanks for the code it will help. But it will be a few versions before this makes it into the App. --- End quote --- Awww... :( Can I report multimeter issues in the mean time? >:D |
| Seppy:
Build 1.4: 1. Resolved issue where pinch can zoom into infinity (when axis disappeared that’s what happened) 2. Changed button colours so that the buttons are more visible to avoid confusion where buttons are (didn't shrink buttons as that section will be used for future buttons) 3. Added support for numbers above 65535 in the Bluetooth packet (you will need firmware 1.22) the packet now has 18 bits for the value. 4. Added graph support for Fahrenheit 5. Added build version in settings screen 6. Added description on settings screen 7. Removed devices that are already connected from settings screen 8. Data is now drawn below graph labels 9. Added 121GW label to the tabs next to the serial number (so it isn't just [ 0 ]) 10. Resolved scaling issue with splash screen 11. Reset also now resets zoom and data, not just data (It didn’t before) Planned changes for 1.5: 1. Remove notch region from app, it will put a black bar there. I will not make use of this space as the app needs to be compatible with other platforms. <- Done 2. Improve scaling of tab titles 3. Improve scaling of and button labels <- Done 4. Merge Bluetooth reconnect fix with version 1.4 <- Done Planned changes for 1.6: 1. Further fixes Planned changes for 1.7: 1. Rescaling x axis lines with round numbers Known Issues: - Bluetooth reconnect will close App, temporary situation haven't merged fix in this build Newest firmware can be downloaded from https://www.eevblog.com/product/121gw/ Avaliable NOW! |
| bicycleguy:
--- Quote from: Seppy on June 20, 2018, 02:38:34 am ---Build 1.4: ... 3. Added support for numbers above 65535 in the Bluetooth packet (you will need firmware 1.22) the packet now has 18 bits for the value. ... Newest firmware can be downloaded from https://www.eevblog.com/product/121gw/ Avaliable NOW! --- End quote --- thanks, So a V2 of '121GW-BLE-Packet-Format-V1.pdf' can be expected? |
| Seppy:
--- Quote from: bicycleguy on June 20, 2018, 04:45:06 pm --- --- Quote from: Seppy on June 20, 2018, 02:38:34 am ---Build 1.4: ... 3. Added support for numbers above 65535 in the Bluetooth packet (you will need firmware 1.22) the packet now has 18 bits for the value. ... Newest firmware can be downloaded from https://www.eevblog.com/product/121gw/ Avaliable NOW! --- End quote --- thanks, So a V2 of '121GW-BLE-Packet-Format-V1.pdf' can be expected? --- End quote --- Absolutely, but not much has changed, only the don't care bits have been used (they display as 0 in the document, should be X). |
| Navigation |
| Message Index |
| Next page |
| Previous page |