| Products > Test Equipment |
| 121GW App Testing |
| << < (16/38) > >> |
| IanB:
--- Quote from: Seppy on June 15, 2018, 01:52:36 am ---I like your suggestion though I will make it display minutes and seconds. --- End quote --- Thank you. Also, if it rolls over 60 minutes it should be hours, minutes, seconds. --- Quote ---Although the log will definitely display seconds, it makes graphing easier. --- End quote --- Agreed. --- Quote ---Looks like we need to add some information to the packet for 1.3, this is for C and F in temperature mode. This means 1.3 for temperature range will require a firmware update. --- End quote --- But if the secondary display is showing "70.8F" can't you use that "F" to trigger the display of °F on the main display? And use "24.2c" to trigger °C? |
| Seppy:
--- Quote from: IanB on June 15, 2018, 02:31:04 am --- --- Quote from: Seppy on June 15, 2018, 01:52:36 am ---I like your suggestion though I will make it display minutes and seconds. --- End quote --- Thank you. Also, if it rolls over 60 minutes it should be hours, minutes, seconds. --- Quote ---Although the log will definitely display seconds, it makes graphing easier. --- End quote --- Agreed. --- Quote ---Looks like we need to add some information to the packet for 1.3, this is for C and F in temperature mode. This means 1.3 for temperature range will require a firmware update. --- End quote --- But if the secondary display is showing "70.8F" can't you use that "F" to trigger the display of °F on the main display? And use "24.2c" to trigger °C? --- End quote --- No worries regarding the hours thing :) Unfortunately the secondary display cannot use the F to trigger F as if you open Menu or change what is displayed up there that section of the packet is dropped. |
| IanB:
--- Quote from: Seppy on June 15, 2018, 02:27:28 am ---Save saves the data shown on the plot, the established data is the plot data. --- End quote --- But I'll mention again that I find it quite inconvenient that I can't start/stop the acquisition of data. What I'd like to do is be able to set up a test where I start acquisition, run the test, stop acquisition, and then review the data. I'd like to be able to scroll around the graph and zoom in/out without the graph auto-updating underneath me. And I'd like to stop acquisition before hitting Save so that I do not have redundant data tagged on the end of my history. |
| JonM:
There needs to be an "About" or settings menu that includes the software version number. I am pretty sure that I woke up at 03:30 this morning after falling asleep watching a new Dave video and having some wine. (It was the late hour and wine not Dave, that did it of course...) and installed the new iOS test version, but I am not certain. When I send data via email the subject line has the new Date_TIme subject line, but when I use "Save to Files" and use Box.com the file name it text.txt with no Date_Time at all. I think that "Save to Files" is going to be the method that I want to use so that name fix would be appreciated. In limited testing it seems that the range (distance between phone and DMM) is better and so is recovery if the connection is lost and there is a re-connect. Thanks! |
| Seppy:
--- Quote from: JonM on June 15, 2018, 03:34:59 am ---There needs to be an "About" or settings menu that includes the software version number. I am pretty sure that I woke up at 03:30 this morning after falling asleep watching a new Dave video and having some wine. (It was the late hour and wine not Dave, that did it of course...) and installed the new iOS test version, but I am not certain. When I send data via email the subject line has the new Date_TIme subject line, but when I use "Save to Files" and use Box.com the file name it text.txt with no Date_Time at all. I think that "Save to Files" is going to be the method that I want to use so that name fix would be appreciated. In limited testing it seems that the range (distance between phone and DMM) is better and so is recovery if the connection is lost and there is a re-connect. Thanks! --- End quote --- Yeah your absolutely correct about the storage Apps, I don't know how to set those filenames yet, they don't seem to allow me to... I've tried a few dozen things there :( I'll figure it out eventually, but this proved a pain in the arse. As for the range, thanks for the feedback :) |
| Navigation |
| Message Index |
| Next page |
| Previous page |