Author Topic: strange values when manual range selecting the Fluke 187 capacitance measurment  (Read 146 times)

0 Members and 1 Guest are viewing this topic.

Offline vinyl

  • Contributor
  • Posts: 6
  • Country: kr
Hi.

When my fluke 187 selects the capacitance measurment mode  manual range(only on 100uF and 1000uF), it reads strange values with the lead open.

lead open
Manual Range   100uF  2.0uF
                      1000uF  16uF
Is this normal?

lead open manual range pictures.

« Last Edit: July 19, 2019, 11:12:22 pm by vinyl »
 

Offline MosherIV

  • Super Contributor
  • ***
  • Posts: 1307
  • Country: gb
Yes. Mine does that as well.
 
The following users thanked this post: vinyl

Offline vinyl

  • Contributor
  • Posts: 6
  • Country: kr

Thank you.  MosherIV

 The other 187 is doing the same thing, so I don't think it's a DMM fault.

Lead open status

It is normal to read very small values (0.067nF) at the manual range 1nF and 10nF, but it is difficult to understand that only the 100uF and 1000uF ranges are strange values.

Five hyphens are displayed in other manual ranges (lead open 1uF, 10uF, 10mF, 50mF).
 


Share me

Digg  Facebook  SlashDot  Delicious  Technorati  Twitter  Google  Yahoo
Smf