EEVblog Electronics Community Forum

Products => Test Equipment => Topic started by: papo on October 14, 2014, 11:24:07 am

Title: Re:Load Pro Video review and teardown
Post by: papo on October 14, 2014, 11:24:07 am

Hello

I backed the kickstarter campaign for this device, recently got mine and had a good look at it. Here is the video (https://www.youtube.com/watch?v=fnhNv7mJWLo&list=UUqiVq5wS2_bCEo8LC7dmkqg). Also, somebody on the IRC channel asked for a picture of the bottom side of the PCB. I attached it to this post. Summary: It's cool. I'm posting this here because I think the unit might be interesting to some of us who don't want to shell out a lot of money for a beefier commercial load, yet want something a bit more rugged and tested than the crude opamp & FET on a perfboard approach.

Regards

Matt

Title: Re:Load Pro Video review and teardown
Post by: deephaven on October 14, 2014, 03:34:04 pm

Nice review and teardown.

Thanks for taking the time to do this.