| Products > Test Equipment |
| Replacement for Fluke 700013 IC (quad SPST analog switch) |
| << < (11/16) > >> |
| JoergR:
Just got recommended this on eBay - seems like someone is already going to production with this ;-) It uses a DG212 and an unidentified second chip - likely a uC? |
| Kleinstein:
The task for the logic is not really suited for a µC (needs to react quite fast, e.g. some 300-1000 ns for the latch pulse). Possible, but I would more expect some PLD / CPLD - though here the 5 V compatibility could be tricky. |
| JoergR:
Something like an ATF16V8, maybe? Those are 5V. |
| Kleinstein:
The PLD looks plausible and should work. |
| Dakkahun:
Hello. I found some information about the development process of that clone: https://groups.io/g/Fluke-DMM/topic/8840a_project_130007_clone/80985930?p=,,,20,0,0,0::recentpostdate%2Fsticky,,,20,2,0,80985930 and https://groups.io/g/Fluke-DMM/topic/fluke_8840a_8842a_8840af/83314606?p=,,,20,0,0,0::recentpostdate%2Fsticky,,,20,2,0,83314606 The final solution uses a "Custom preprogrammed CMOS logic." |
| Navigation |
| Message Index |
| Next page |
| Previous page |