Products > Test Equipment

Replacement Knobs, Feet and Fittings for Test Equipment

<< < (63/63)

BlownUpCapacitor:
Here I have some feet for the Tektronix 7000 series mainframes. I have included both polarities for the feet, right and left (or left and right depending on if you are looking from the front or back).

https://cad.onshape.com/documents/4b6617036525a66a77628146/w/d47c5d3eb3ce438621c60860/e/e9ec7d4b98e91859e3fa4788?renderMode=0&uiState=678a796afb0a3a3e9e515d4c

The design is to be refined but it currently works just fine with no issues.

Warning!: If you print this in PLA, ABS, or any non-high-friction material, it will not have the same amount of traction as the original feet. The original foot inserts were rubberized for better traction.

LorenzoDL:
I made some replacements for a fluke 45 that I repaired lately.

Here the links and some photos:
https://www.printables.com/model/1000276-fluke-45-power-button-extender
https://www.printables.com/model/1000267-fluke-45-back-plastic-bezel

Navigation

[0] Message Index

[*] Previous page

There was an error while thanking
Thanking...
Go to full version
Powered by SMFPacks Advanced Attachments Uploader Mod