Products > Test Equipment

Replacement Rotary switch in a Fluke 720a and photos

(1/1)

NANOJOLTS:
Here's a comparison of a rotary switch from a (Fluke 720a) and a (Leeds Northrup) rotary switch.

I replaced a broken rotary switch (S8) in a (Fluke 720a) with a Leeds Northrup rotary switch.

Fluke switch has 4 leaves?  and Leeds switch has 3 leaves?.

You think it will work?

Vgkid:
There should not be a big problem, as long as all of the connections are good. The L&N type 31 switches are good.
I did a test on one , a few years ago.
https://www.eevblog.com/forum/metrology/4-wire-switch-selectable-resistance-standard/msg1172561/#msg1172561

NANOJOLTS:
The Fluke 720a seems to have had failing/broken rotary switches S2 and S8.
Photo of manual notice to than affect, dated 3/97.

Vgkid:
Unfortunately it looks like multi-tech industries website is down
 :(

Navigation

[0] Message Index

There was an error while thanking
Thanking...
Go to full version
Powered by SMFPacks Advanced Attachments Uploader Mod