Products > Test Equipment
Restoration of Lecroy WaveMaster / WavePro Front Bezel by 3D Printing
<< < (3/8) > >>
Mechatrommer:

--- Quote from: Converter on March 08, 2019, 03:40:53 pm ---Currently, I am fairly successfully restoring old broken frames. I use dichloroethane and fiberglass-reinforced epoxies, which I mix with dyes in the original color of this product.

--- End quote ---
if you have the original frame, however broken it is, 3d printed part wont be necessary, as long as you have all the pieces to glue back together


--- Quote from: Converter on March 08, 2019, 03:40:53 pm ---Have you seen this frame in shapeways.com?

--- End quote ---
just upload the stl model to their website, choose what material and hit the button, you'll get your quotation.
Mechatrommer:
final touch up is made during the weekend before this guy goes to a company in taiwan. another layer of polish and paint and lastly clear coat is applied. labelling is done, 80% exterior is cleaned esp the top part of the casing. this is how it looks before departure :(
Converter:
Now it looks much better. But something is wrong with the color of the keyboard.
Have a photo of the back of the frame?
Mechatrommer:

--- Quote from: Converter on March 11, 2019, 11:40:11 pm ---Now it looks much better. But something is wrong with the color of the keyboard.
Have a photo of the back of the frame?
--- End quote ---
what keyboard? when the clear coat is applied, the light blue color contrast is increased and becomes darker, i think much more matching with front panel control and the body, except the glossiness (i tried carefull enough to get matte finish but not 100% successful). the back of frame is unpainted, except smeared with flying mist of spray paint, otherwise it is as it was when printed/unpainted (visible layer steps). btw the dda5005a is boxed already ready to be picked up, kinda sad and sorrow :(
Converter:
Do not worry, you have a reason to rejoice. You have already received a beautiful 1K discount in Thailand and sent him another counter offer yesterday  ;)

By the way, the LeCroy sticker can be made this way.
Navigation
Message Index
Next page
Previous page
There was an error while thanking
Thanking...

Go to full version
Powered by SMFPacks Advanced Attachments Uploader Mod