Products > Test Equipment

Review of the Korad KEL103 programmable load.

<< < (6/11) > >>

ahope:
Yes, I am looking for a short. Not found one so far, only the broken caps.
There is some resistance (kohms) between output of the 7812 and ground, so no "hard" short. I came across those broken caps while searching for the short.

I will keep looking for that short. I am considering solder out the 7812 and insert probes between output of the 7812 to see power draw.

HKJ:
I was rather interested in this load: Cheap with build-in network and serial connection.

I got one and have added it to TextController https://www.eevblog.com/forum/testgear/program-that-can-log-from-many-multimeters/





I like it uses a LED display. The network interface uses UDP, that is not the best for instrument control, but I got it working.

graybeard:
Newark (Farnell) has rebranded the Korad loads from Tenma to MulticompPro.

Currently the 300W unit (Korad KEL103) is $255

The 150W model is $205

nightfire:
Other rebrands/rebadges are Stamos Soldering S-LS-60 and S-LS-61, respectively 150W/300W.
Got mine via german ebay, also sold on Amazon.

Electro Fan:

--- Quote from: graybeard on February 24, 2021, 04:50:54 pm ---Newark (Farnell) has rebranded the Korad loads from Tenma to MulticompPro.

Currently the 300W unit (Korad KEL103) is $255

The 150W model is $205

--- End quote ---

Those are pretty nice prices.  They must be overstocked or something.

Navigation

[0] Message Index

[#] Next page

[*] Previous page

There was an error while thanking
Thanking...
Go to full version
Powered by SMFPacks Advanced Attachments Uploader Mod