Products > Test Equipment
RF connector input (R&S FSP7)
(1/1)
pogrebnushkin:
Hi. I try to find a partnumber rf connector of R&S FSP7 spectrum analyzer. Maybe somebody could help me with it. Thanks
Kean:
That is a whole cable assembly.

The damaged N connector looks like it could be from the Huber+Suhner 25_N-50 series.
tooki:
Indeed, getting the connectors is the easy part; getting the rigid coax, assembling it to the connectors, with the correct ferrites in the right spots, and then bending it to shape, not so easy!

I don’t have enough experience with rigid coax to tell whether that connector is soldered or crimped; if it’s soldered, maaaaaaybe it’s possible to replace the damaged N connector only.
Kean:

--- Quote from: tooki on June 19, 2024, 06:42:27 am ---Indeed, getting the connectors is the easy part; getting the rigid coax, assembling it to the connectors, with the correct ferrites in the right spots, and then bending it to shape, not so easy!

I don’t have enough experience with rigid coax to tell whether that connector is soldered or crimped; if it’s soldered, maaaaaaybe it’s possible to replace the damaged N connector only.

--- End quote ---

Exactly the same thoughts here.

As is common, the OP doesn't really provide enough info, and seems not to have done any initial research.
If they use a FSP7 then they would presumably also have enough RF experience to know this stuff.
Navigation
Message Index
There was an error while thanking
Thanking...

Go to full version
Powered by SMFPacks Advanced Attachments Uploader Mod