| Products > Test Equipment |
| Rigol DG1022Z Function Generator Hack |
| (1/2) > >> |
| dublindevil:
I recently purchased the Rigol DG1022Z function generator. It has a bandwith of 25MHz and so far, it has worked perfectly for my needs. Mostly out of curiosity, is there a hack to upgrade the bandwidth on the generator up to the 60MHz of the 1000$ 1062Z? Here is the listing on the rigol site: https://www.rigolna.com/products/waveform-generators/dg1000z/ -Dub |
| Holes Flow:
Count me in to this question as "Me, too!" |
| Gandalf_Sr:
I wondered the same thing. I have a DG4062 and a DG1022Z, apart from a few button differences and the fact that the DG1022Z screen is about 1/4 the size of the DG4062, the functionality is almost identical between them. That makes me wonder if Bandgap's work here https://www.eevblog.com/forum/testgear/dg4000-a-firmware-investigation/100/ is relevant? Perhaps someone could try to insert the DG1022Z model and serial number and see if the compile works? When I tried this for my 4062, I could not make the online compiler work. Perhaps we could ask Bandgap to get involved? Having said that, as far as I can tell, all you would gain is higher frequency sine waves and a deeper AWG memory, I haven't needed either yet. |
| BLF Lexel:
You can hack the DG1022Z to 1062Z the same way a DP832 can be upgraded to DP832A You need to enter telnet command and have a USB flash driver with a file on it I used the Rigol Bildschirmkopie Tool to do so, but CMD works as well with telnet http://peter.dreisiebner.at/rigol-bildschirmkopie/index.htm I tried Bildschirmkopie only via Network, maybe someone makes it work with USB, but this needs correct IVI drivers to send commands Step 1 Activate Telnet in your windows features and restart PC Step 2 connect the function generator to the network check if connection is good with ping also a firewall may cause problems even with ping working, the DG1022Z I could only get sent SCPI commands on a very old standalone PC in my basement shop step 3 get a FAT formatted USB stick and write the keyfile.bin in the main directory https://www.eevblog.com/forum/testgear/need-help-hacking-dp832-for-multicolour-option/?action=dlattach;attach=696567 Step 4 with Bildschirmkopie - start it - ctrl+E to do a search on the network and connect the Rigol device - search for devices and choose the one you want to unlock - open SCPI commands - check device signature - send SCPI command with new Model name - reboot device and check again device signature step 4 with cmd - start telnet telnet [IP_Address] 5555 - same commands as with Bildschirmkopie to write new device number |
| Gandalf_Sr:
I got this to work using telnet commands, it's explained here for the DP832 and DG1022Z https://www.eevblog.com/forum/testgear/need-help-hacking-dp832-for-multicolour-option/msg2470974/#msg2470974 |
| Navigation |
| Message Index |
| Next page |