| Products > Test Equipment |
| Rigol DG1022Z or Siglent sdg1032x |
| << < (4/8) > >> |
| TurboTom:
There isn't any difficulty generating short, fast pulses with a single channel of the DG800/900 series: Configure the pulse you like at an arbitrary frequency, and then use the "N Pulse Burst" function with the pulse count set to 1 to adjust the repetition frequency. My example shows a pulse of 16ns width, rise-and fall times of ~8ns (limit for this AWG series) and a frequency of 1 Hz. The other channel is still available and no external wiring etc. required. Sorry for the shitty quality of the photo... ;) |
| rf-loop:
Of course I know what it can do. So trivial basics. But... When I need 2 independent short pulses, as I told, with independent but sometimes long period or very long period and so that both pulses width can adjust independently and with small ns class steps and so that I can fine adjust other channel pulse position relative to other channel I really do not change my needs to match generator. In this case I change generator so that it match to my needs. Not vice versa because I am not playing just fun for spending time. ;) |
| rauldm:
Is a difficult decision, but siglent i like it for pulse tecnology front host USB port and ethernet. Rigol dg811 is interesant for fanless design and very high power after to hack. |
| rauldm:
Finally I got the SDG 2042X and unlock to 120 MHz, very good equiment for test, can read csv files from, DSOX2002a, TDS3064B, and siglent sds1104x-e, even with last mencioned oscilloscope can do bode plotting without need USB connection, can be over LAN. With very long memory i dont worry for memory data points from my oscilloscope or simulation software like PSIM. |
| Yura123:
Hello everyone. The characteristics of the DG1022Z generator indicate that it has a memory of 2 Mpt. In ARB mode, I can only specify 16.384 Kpt. What kind of memory are we talking about? And why is 1 SaRate/S equal to 100mHz ? |
| Navigation |
| Message Index |
| Next page |
| Previous page |