Products > Test Equipment

Rigol DHO800/900 new firmware... 1.03

(1/99) > >>

Fungus:
Just saw  there's a new firmware for our DHOs:

Release notes:

v00.01.03.00.04  2024/07/11

1. Solve the problem of vertical gear adjustment disappearing.
2. Solve the problem of Math module filter operation saving screen waveform in. csv file format and program controlled acquisition being empty.
3. DHO800 adds 5M storage depth.
4. Resolve the issue of channel 4 triggering status not being remembered when loading the last value.
5. Increase screen brightness adjustment function.
6. Solve the problem of auto failure when the instrument is connected to a self checking square wave and in a state above 2x gears.
7. Solve the problem of eliminating burrs in adjusting the time base waveform during waveform recording and playback.
8. Support modifying measurement items after opening the measurement module.
9. Add SMB network storage function.
10. Solve the problem of SPI decoding failure in digital channels.
11. Solve the problem of AX and BX following changes when the tracking cursor changes in time base.
12. Solve the problem of unstable triggering of 2Hz triangular wave input in 100ms non rolling mode.
13. Resolve the issue of inconsistency between webcontrol resolution and instrument screen.
14. Add quick on/off function.
15. Solve the problem of video triggering function not functioning properly.
16. Solve the problem of small sparrow RS232 triggering not being able to be triggered at low baud rates.
17. Resolve multilingual translation errors.

Fungus:
3, 9 and 14 are new features.

Fungus:
Just powered on my DHO800 and the firmware appeared in the menu automatically (over WiFi).

Downloading now...  :popcorn:

Fungus:
OK, got it upgraded...


I still have 100M bandwidth option but the 50M memory option isn't there. The release notes mentions "5M memory" on a DHO800 and I have 5M with all four channels enabled.

Maybe they changed something in the memory code in the firmware or maybe my licenses are messed up with all my hacking, I'm not sure. I'll check out the licenses later.

Fungus:
I can confirm that the serial decoder threshold level with 10x probe settings is fixed even though the release notes don't mention it.

Power off has a new "sleep" mode.

When it's asleep it wakes up in about 25 seconds.

Not amazing, but a lot faster than the usual 60 seconds or so it takes to power on.

Navigation

[0] Message Index

[#] Next page