Products > Test Equipment

Rigol DHO800/900 pre-sales begin

<< < (28/53) > >>

UK:

--- Quote from: ima hogg on September 15, 2023, 04:06:39 am ---Any reason not to pull the trigger on this and pickup a DHO924S and PLA2216?

--- End quote ---

Why not a 914S + cheap diy PLA2216 (with SN65LVDS391 drivers) ?  you may save about a third of your budget

simone.pignatti:
Hello, here is a first image of the DHO924S power by a power bank. Monday will record a video to see how long the unit will work with a full charge.

Fungus:
So cool...

Fungus:

--- Quote from: simone.pignatti on September 15, 2023, 08:51:11 am ---Hello, here is a first image of the DHO924S power by a power bank. Monday will record a video to see how long the unit will work with a full charge.

--- End quote ---

It's 36W consumption so you should be able to calculate it within 10-20% based on the capacity of your power bank.  :)

JebCrag:
Hello, I've got an UltraAcquire mode question.

I'm interested in getting a new scope (currently use a 1054z) and am considering the 924S as the feature list looks so appealing.  I definitely want a segmented/deep memory mode to catch intermittent errors that I can't specifically trigger off, but I'm not sure from the user guide how this works on these scopes.

Can anyone tell me whether this has a "typical" segmented memory mode (like on the rigol MSO2000 series I can use at work), where I could fill up the memory with a series of waveforms, and then cycle through them one by one?  The user guide explains some interesting ways of displaying many signals next to each other, but I can't tell if I can select waveforms one by one, and ideally use the cursor or measure tools on them.

Thanks!

Navigation

[0] Message Index

[#] Next page

[*] Previous page

There was an error while thanking
Thanking...
Go to full version
Powered by SMFPacks Advanced Attachments Uploader Mod