Products > Test Equipment

Rigol DHO800/900 pre-sales begin

<< < (32/53) > >>

tautech:

--- Quote from: Fungus on September 16, 2023, 09:39:56 am ---
--- Quote from: tautech on September 16, 2023, 02:55:54 am ---... pitiful, SDS1104X-E can capture and playback 80k frames !

--- End quote ---

The DHO800/900 can have 50MPts of memory which easily beats the 14Mpts in the Siglent.

--- End quote ---
With all channels active ?

Martin72:
Hehehe.... ;)

Fungus:

--- Quote from: tautech on September 16, 2023, 10:39:40 am ---
--- Quote from: Fungus on September 16, 2023, 09:39:56 am ---The DHO800/900 can have 50MPts of memory which easily beats the 14Mpts in the Siglent.

--- End quote ---
With all channels active ?

--- End quote ---

Stop trying to move the goalposts. The task being discussed was using a single channel. The Rigol has more than 3x the memory for that task.

Fungus:

--- Quote from: Martin72 on September 16, 2023, 11:23:42 am ---Hehehe.... ;)

--- End quote ---

And who knows, it might be able to have much more!

It's the same firmware as the 4000-series so the limit will be defined in software.  :popcorn:

2N3055:

--- Quote from: Fungus on September 16, 2023, 09:18:46 am ---
--- Quote from: tautech on September 16, 2023, 02:55:54 am ---Who wants to see 100 frames at once ?
Surely they mean it can capture 100 frames < pitiful, SDS1104X-E can capture and playback 80k frames !

--- End quote ---

Try watching the video, he captures 500k frames (on a DHO4000, which has more memory).


What he means is that in that 3D visualization mode you only see 100 frames at once. You can scroll back and forth through the 500k but only see 100 at once.


Please post screenshots of the SDS1104X-E 3D mode for comparison.

--- End quote ---


You are going to capture  half a MILLION of screens, and then sift through 5000 screens with 100 captures each visually and find a problem just by looking at those.. Good luck with that.
It is useless gimmick.

Other scopes have visual overlap mode and animation mode because that is useful. 3D plot are useful and used widely but not this way..

But that is not even the point. You are confusing segmented mode and UltraAck mode that are not the same..

In segmented (record) mode it seem it can capture 100 of thousands of captures and then only animated play trough them. I UltraAcquire mode it can only get some 100 or 80 captures, show them and then resets and starts again..

 The UltraAcquire mode is not available when any of the following functions is enabled:
cursors, decoding, Search, Zoom, Pass/Fail test, waveform recording, reference waveform,
roll mode, slow sweep mode, and XY mode. To switch to the UltraAcquire mode, please
ensure that all of those functions are disabled.

Navigation

[0] Message Index

[#] Next page

[*] Previous page

There was an error while thanking
Thanking...
Go to full version
Powered by SMFPacks Advanced Attachments Uploader Mod