Products > Test Equipment
Rigol DHO924S bandwidth measurement
juhand:
Hi, I made a Rigol HDO924S bandwidth measurement.
I used R&S SMB100A signal generator for source, and I calibrated with a R&S URV35.
I used 0 dBm @ 50ohm, that is
sqrt(50*10^0/1000)=224mVrms
sqrt(50*10^0/1000)*sqrt(2)*2=632mVpp
and I set the oscilloscope to 200mV/div.
TimFox:
And the answer was?
egonotto:
--- Quote from: TimFox on July 01, 2024, 03:28:58 pm ---And the answer was?
--- End quote ---
303 +-5 MHz
Fungus:
My DHO804 measures at about 280Mhz when I tell it to be a DHO924.
nb. I did it via a rise time calculation, I don't have a 300MHz signal generator.
J-R:
--- Quote from: Fungus on July 01, 2024, 05:19:50 pm ---My DHO804 measures at about 280Mhz when I tell it to be a DHO924.
nb. I did it via a rise time calculation, I don't have a 300MHz signal generator.
--- End quote ---
Maybe pick up a tinySA Ultra?
Navigation
[0] Message Index
[#] Next page
Go to full version