Products > Test Equipment
Rigol DP832 - Firmware list and bugs
Armxnian:
The specs on the rigol product page and data sheet give different values. I would trust those values over the manual.
broderp:
--- Quote from: Armxnian on April 24, 2015, 07:38:37 pm ---The specs on the rigol product page and data sheet give different values. I would trust those values over the manual.
--- End quote ---
hmmmm..it sure does doesn't it.. :popcorn: I'm ok with that.... ;)
netdudeuk:
I adore my DP832 but since I used the OCP option, even when it's set to off, switching on the channel sometimes causes the OCP message to appear with the power being turned off. Anyone else seen this ? I've not upgraded he firmware since I bought it in November.
kjdotts:
--- Quote from: netdudeuk on April 25, 2015, 06:09:53 am ---I adore my DP832 but since I used the OCP option, even when it's set to off, switching on the channel sometimes causes the OCP message to appear with the power being turned off. Anyone else seen this ? I've not upgraded he firmware since I bought it in November.
--- End quote ---
I have not personally experienced that issue or encountered it anywhere online. If it was my unit, I would update the firmware (currently v00.01.13.00.01, bootloader v01.09, released 2014-11-18) and maybe reset everything to the default presets. If the issue still occurs, try to nail down what sequence of events creates the issue. If it's a firmware bug and you can recreate the issue then you could report it here and to Rigol.
Good Luck!
-Kris
netdudeuk:
Don't you have to re-calibrate after updating the firmware ? If it needs some extra kit, that's not something that I could do. Also, as mentioned above, it looks like Rigol don't say what the updates fix and so there's no guarantee that I'd be better off.
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version