Products > Test Equipment
Rigol DP832 - Firmware list and bugs
<< < (109/153) > >>
nicolasg:
Sigh, they sent me the link to the 1.14 fw. Now the dance begins to get the proper one.

Ill report back once I do get the proper one, or hopefully someone else on this thread can post the 1.16 they have.
Sparky:
I have updated the first post with information about:
1) Rare random reboots reported by a few users
2) Rare network drop outs, resolved by firmware 00.16 (not officially released, but can obtained from Rigol technical support, or here)

Sparky
Sparky:

--- Quote from: ornea on August 22, 2018, 11:44:13 pm ---That has been my exact problem and driving me nuts since day dot.  Is it possible to share the file or perhaps the rigol contact.

--- End quote ---

@ornea: I have posted a link to the firmware in the original post.  Please try it and report back if it solves your problem.



--- Quote from: nicolasg on November 15, 2018, 12:21:49 am ---Sigh, they sent me the link to the 1.14 fw. Now the dance begins to get the proper one.

Ill report back once I do get the proper one, or hopefully someone else on this thread can post the 1.16 they have.

--- End quote ---

@nicolasg: I have posted a link to the firmware in the original post.  Please try it and report back if it solves your problem.


Sparky
ornea:
Thanks. I got the file from rigol and installed ok. I ran my logger script fine for about an hour or so. No glitches. So far so good.
I will report back if it craps out.
ornea:
I have upgraded a DP831 and a more recently DP832A that both had network issues.  It would randomly drop off the network, unable to ping etc.
I use python via telnet using scpi commands to automate various tasks.

It is still early days but I have not detected any issues and thought others maybe interested in the firmware rather than going thru Rigol.    (Rigol in both instances were prompt  responding)

If so where should I upload the firmware and instructions?

Note: the instructions are a little clunky and defaults back to chinese and defaults some other setting you may have set but not too hard to revert.

pre DP832a upgrade
Digital: 00.01.14.00.03
Analog 03.02.04.03.02.04

post upgrade
Digital 00.01.16.00.00
Analog Same no change
Navigation
Message Index
Next page
Previous page
There was an error while thanking
Thanking...

Go to full version
Powered by SMFPacks Advanced Attachments Uploader Mod