Products > Test Equipment

Rigol DP832 - Firmware list and bugs

<< < (109/153) > >>

nicolasg:
Sigh, they sent me the link to the 1.14 fw. Now the dance begins to get the proper one.

Ill report back once I do get the proper one, or hopefully someone else on this thread can post the 1.16 they have.

Sparky:
I have updated the first post with information about:
1) Rare random reboots reported by a few users
2) Rare network drop outs, resolved by firmware 00.16 (not officially released, but can obtained from Rigol technical support, or here)

Sparky

Sparky:

--- Quote from: ornea on August 22, 2018, 11:44:13 pm ---That has been my exact problem and driving me nuts since day dot.  Is it possible to share the file or perhaps the rigol contact.

--- End quote ---

@ornea: I have posted a link to the firmware in the original post.  Please try it and report back if it solves your problem.



--- Quote from: nicolasg on November 15, 2018, 12:21:49 am ---Sigh, they sent me the link to the 1.14 fw. Now the dance begins to get the proper one.

Ill report back once I do get the proper one, or hopefully someone else on this thread can post the 1.16 they have.

--- End quote ---

@nicolasg: I have posted a link to the firmware in the original post.  Please try it and report back if it solves your problem.


Sparky

ornea:
Thanks. I got the file from rigol and installed ok. I ran my logger script fine for about an hour or so. No glitches. So far so good.
I will report back if it craps out.

ornea:
I have upgraded a DP831 and a more recently DP832A that both had network issues.  It would randomly drop off the network, unable to ping etc.
I use python via telnet using scpi commands to automate various tasks.

It is still early days but I have not detected any issues and thought others maybe interested in the firmware rather than going thru Rigol.    (Rigol in both instances were prompt  responding)

If so where should I upload the firmware and instructions?

Note: the instructions are a little clunky and defaults back to chinese and defaults some other setting you may have set but not too hard to revert.

pre DP832a upgrade
Digital: 00.01.14.00.03
Analog 03.02.04.03.02.04

post upgrade
Digital 00.01.16.00.00
Analog Same no change

Navigation

[0] Message Index

[#] Next page

[*] Previous page

There was an error while thanking
Thanking...
Go to full version
Powered by SMFPacks Advanced Attachments Uploader Mod