Author Topic: Rigol DS 2000 upgrade codes-am I missing something  (Read 1047 times)

0 Members and 1 Guest are viewing this topic.

Offline Titan 4380

  • Contributor
  • Posts: 14
  • Country: au
Rigol DS 2000 upgrade codes-am I missing something
« on: July 26, 2017, 11:13:32 am »
Being a bit of a Rigol junkie, I purchased a DS2072 and upgraded it to a DS2302 using RigolBildschirmkopie to get the mem dump and then rigup to extract the upgrade codes. While reading through this forum, I came across lot of posts where users were trying to unsuccessfully upgrade their scopes using Riglol-103x. Out of curiosity, I uninstalled all of the options on my scope and tried to use the Riglol web app to generate new codes. None of the codes worked and I keep getting the error "license is unavailable". Below is a list of the codes as provided by Rigup which work wonderfully. It appears that you can enter any 4 digit device option code into the Riglol web app and it will still produce a series of codes (that don't work);
Rigup codes from my scopes memory dump;
NSEH:  8KBRBBH-Q9BFYBY-T5BKQYB-6VC67VM    All options, no bandwidth upgrade
NSER:  HQEBNFRGES5XB5MVMWMND5EG948M    All options, bandwidth 100 MHz
NSEQ:  SNC368R67YCJ3X-HYBDQ2Q-QN8BBVM    All options, bandwidth 200 MHz
NS8H:  KRXUWUV-N8MDK4E-5GERZWV-DJ5QL5M    All options, bandwidth 300 MHz

Why are the riglol device option codes so different from what rigup displays?
I am looking at the purchase of a DS4000 series and I was hoping to use the Riglol web app to upgrade the scope, so getting an answer on this is pretty important to me.

Share me

Digg  Facebook  SlashDot  Delicious  Technorati  Twitter  Google  Yahoo