Products > Test Equipment
Rigol DS1000Z series buglist continued (latest: 00.04.04.04.03, 2019-05-30)
<< < (7/74) > >>
Fennec:

--- Quote from: frozenfrogz on April 13, 2017, 12:47:56 pm ---On the positive side: I am glad you could revive your scope via reinstalling the firmware again.

--- End quote ---

Yepp, hope the new owner is happy with the scope. I don't like use it anymore.
frozenfrogz:
I totally understand your frustration. Could you please post the board/boot/fw version of the scope so I can put it in the buglist? Might be a good thing for others to not crash into that same wall as you did.

Thank you :)

FYI:
Just had a talk with someone at Rigol EU here in Germany and on Tuesday 18th the technician in charge of handling bug reports is back in office. I am going to call to talk about the buglist and some other things. Don’t know what will happen, but you never know :)
Will keep you posted.
Fennec:
There's /was a RIGOL contributor here in the forum.
Fungus:

--- Quote from: Fennec on April 13, 2017, 12:42:03 pm ---Easy way.
I made a new thumb-drive with the firmware, pluged it in and start the scope. And viola, the screen doesn't show the calibration failure screen anymore and want do a firmware update. NOW the buttons working. I have no idea what happens yesterday.

--- End quote ---

Ummmm... your firmware got corrupted? Flash memory, it happens.

Luckily the 'scope has a recovery mode, all you had to do was insert a thumb-drive and it fixed itself.

No need for all the anti-Rigol ranting, it can happen to any device with Flash memory.


--- Quote from: Fennec on April 13, 2017, 12:42:03 pm ---*Exsample Fluke. I send in a 30 years old Fluke 8840A for calibration. One Knob wouldn't work sometimes, not a real deal. It comes back with a complete new Front, new Knobs and a Letter "Thank you for using our Service". So what should I say ?!

--- End quote ---

Have you looked at the price of Flukes?  :-//

Fennec:

--- Quote from: Fungus on April 13, 2017, 03:38:20 pm ---Luckily the 'scope has a recovery mode, all you had to do was insert a thumb-drive and it fixed itself. No need for all the anti-Rigol ranting, it can happen to any device with Flash memory.

--- End quote ---

How does it works, if I can not press any key ?


--- Quote from: Fungus on April 13, 2017, 03:38:20 pm ---Have you looked at the price of Flukes?  :-//

--- End quote ---

I don't have payed for that fix, for the calibration only.

What has the price to do with the quallity of service? Nothing.

Exsample again. Uni-T. I had a damaged Uni-T. I have sent it back to CHINA. Shipping was more than $US150. The device itself costs about $US90. I've got a new Device + my money back. Is that service or what ?
So don't say "i have to pay for service"
Navigation
Message Index
Next page
Previous page
There was an error while thanking
Thanking...

Go to full version
Powered by SMFPacks Advanced Attachments Uploader Mod