| Products > Test Equipment |
| Rigol DS1000Z series buglist continued (latest: 00.04.04.04.03, 2019-05-30) |
| << < (70/74) > >> |
| DC1MC:
--- Quote from: Adrian_Arg. on October 30, 2021, 02:54:55 pm ---I read the list from version 00.04.05.02.00 onwards, and it scares me to update, it corrects a lot of errors, but what it can create scares me more >:D, for something they still did not correct the 24bit deep, they do not want to think about what would happen !! :-// --- End quote --- I have loaded and tested the firmware, from calibration, to licenses (all active) to signal shapes compared with previously saved values, to measurement. I can tell that there are no visible regressions. Cheers, DC1MC |
| Adrian_Arg.:
--- Quote from: DC1MC on October 30, 2021, 03:10:58 pm --- --- Quote from: Adrian_Arg. on October 30, 2021, 02:54:55 pm ---I read the list from version 00.04.05.02.00 onwards, and it scares me to update, it corrects a lot of errors, but what it can create scares me more >:D, for something they still did not correct the 24bit deep, they do not want to think about what would happen !! :-// --- End quote --- I have loaded and tested the firmware, from calibration, to licenses (all active) to signal shapes compared with previously saved values, to measurement. I can tell that there are no visible regressions. Cheers, DC1MC Friend, I installed the firmware, it was installed correctly, the yellow trace and the others were left above the marker, and it does not allow to calibrate, it gives an error at 5 minutes, how degraded? --- End quote --- |
| DC1MC:
--- Quote from: Adrian_Arg. on October 30, 2021, 03:49:56 pm ---... Friend, I installed the firmware, it was installed correctly, the yellow trace and the others were left above the marker, and it does not allow to calibrate, it gives an error at 5 minutes, how degraded? --- End quote --- I've installed it on a MSO1074Z (I can provide pictures if needed), I was having exactly zero issues: the procedure was: Installing -> Power Cycling -> Factory Reset -> Calibration -> Other tests regarding the the behavior. Everything went A-OK EDIT: The firmware was taken from here: https://www.rigolna.com/firmware/ and I've used the DS1000Z version, suitable for my scope. DC1MC |
| Adrian_Arg.:
On the sixth try I calibrate, I really don't know what happened to the baby :(, gracias DC1MC :-+ |
| DC1MC:
--- Quote from: Adrian_Arg. on October 30, 2021, 04:21:05 pm ---On the sixth try I calibrate, I really don't know what happened to the baby :(, gracias DC1MC :-+ --- End quote --- No hay de qué. |
| Navigation |
| Message Index |
| Next page |
| Previous page |