Products > Test Equipment

Rigol DS1000z/2000/4000/6000 Waveform Capture Utility

<< < (5/10) > >>

JDubU:

--- Quote from: AlessandroAU on December 23, 2014, 05:39:06 am ---I am still working on support for other scopes, currently it is quite hard as I only have access to a 1074z. So far my program only detects which series scope is selected. It does not yet load configuration changes for the higher model scopes. If you have a ds2000 I could send you a WIP to try if you would like.

--- End quote ---

I do have a DS2000 and would be happy to test a WIP.

AlessandroAU:

--- Quote from: JDubU on December 23, 2014, 06:29:10 am ---
--- Quote from: AlessandroAU on December 23, 2014, 05:39:06 am ---I am still working on support for other scopes, currently it is quite hard as I only have access to a 1074z. So far my program only detects which series scope is selected. It does not yet load configuration changes for the higher model scopes. If you have a ds2000 I could send you a WIP to try if you would like.

--- End quote ---

I do have a DS2000 and would be happy to test a WIP.

--- End quote ---


Let me know if this version works for you:

V2.2.3

http://s000.tinyupload.com/?file_id=90659414641703074947

pa3bca, Please also try that version and let me know if it fixes any of the issues you were having. :)

aroby:
I tried the prior version (2.2.1) with my DS2072A / DS2302A.  I had to manually enter TCPIP::10.10.10.45::INSTR in the drop down menu, but it was able to connect.  With 2.2.3, I do the same and just get Error in the Model Detected field.

Anthony

AlessandroAU:

--- Quote from: aroby on December 24, 2014, 04:39:20 am ---I tried the prior version (2.2.1) with my DS2072A / DS2302A.  I had to manually enter TCPIP::10.10.10.45::INSTR in the drop down menu, but it was able to connect.  With 2.2.3, I do the same and just get Error in the Model Detected field.

Anthony

--- End quote ---

I haven't implemented TCP/IP, can you try with usb?

Edit, Hang on, were you able to connect over TCP/IP in version 2.2.1 and download a waveform?

aroby:

--- Quote ---I haven't implemented TCP/IP, can you try with usb?

Edit, Hang on, were you able to connect over TCP/IP in version 2.2.1 and download a waveform?

--- End quote ---

Yes.  Just tried it again.  I can do a screen capture.  In the Realtime Capture tab, I can select channels, I can see a waveform (but it says "Input is invalid!" on the scope), if I change the scales on the scope, the graphs change.  On Long Memory Capture, changing the # of points gets reflected on the scope (albeit with the issues previously described).  When I hit Capture, the scope Stops, I get Input is invalid, and nothing gets displayed.

Navigation

[0] Message Index

[#] Next page

[*] Previous page

There was an error while thanking
Thanking...
Go to full version
Powered by SMFPacks Advanced Attachments Uploader Mod