| Products > Test Equipment |
| Rigol DS1000z/2000/4000/6000 Waveform Capture Utility |
| << < (6/10) > >> |
| aroby:
Just tried 2.2.3 with USB. I can connect and it detects a DS2000 series. I can change channels (although 3 & 4 are not present on the scope!). I can't do a continuous sample and get a waveform - scope just displays input is invalid, changing the scope scales has no effect on the charts, I can't get a screenshot. And when I exit, I get a dialog box saying Resetting VI: Rigol_Capture.vi, which I can only get rid of by killing the process. So, for me, 2.2.3 is broken compared to 2.2.1 |
| AlessandroAU:
--- Quote from: aroby on December 24, 2014, 05:02:33 am ---Just tried 2.2.3 with USB. I can connect and it detects a DS2000 series. I can change channels (although 3 & 4 are not present on the scope!). I can't do a continuous sample and get a waveform - scope just displays input is invalid, changing the scope scales has no effect on the charts, I can't get a screenshot. And when I exit, I get a dialog box saying Resetting VI: Rigol_Capture.vi, which I can only get rid of by killing the process. So, for me, 2.2.3 is broken compared to 2.2.1 --- End quote --- Its very odd that that real-time mode has broken, I have not made any changes. I took a look at the ds2000 programming guide, looks like prehaps the ds2000 needs a few extra commands to get the memory buffer. Also removed a command from realtime mode, prehaps it will work now. Also added a manual model override function. -so if you were using tcpip in version 2.2.1 it should work now provided you set the model. Actually I had no idea labview automatically handles VISA over TCPIP like that. So that's a win V2.2.3.1 http://s000.tinyupload.com/?file_id=22255824192654410391 |
| Bud:
DS2072A 2.2.3 and 2.2.3.1 are unusable to me... The most I can get is a screen capture, and not always. In other tabs the program just freezes and I have to kill via Windows Task Manager 2.2 worked at least somewhat, I can make screenshots, in Real Time Capture it displays a static picture of waveform and FFT (no real time update), but in Long memory Capture just displays a straight line in Waveform window. Anyway, 2.2 at least not freezing and does grab some data. |
| Bud:
Just discovered something. If in 2.2.3.1 I select the device *and* set Manual Model Overwrite to DS2000, then the program behaves similar to 2.2 I can do screen capture, I can see static waveform/FFT in Real Time Capture tab (still no realtime update, though the program reflects X and Y scale changes if I change it on the scope) , nothing displayed in Long Memory capture, though I can see the "LED" lights blinking as I press Capture button EDIT: I was in USB mode EDIt2: TCPIP did not work. The program just froze EDIT3: I am on Win7 64 , 32-bit LabView Runtime |
| pa3bca:
--- Quote from: AlessandroAU on December 24, 2014, 05:38:33 am --- Its very odd that that real-time mode has broken, I have not made any changes. I took a look at the ds2000 programming guide, looks like prehaps the ds2000 needs a few extra commands to get the memory buffer. Also removed a command from realtime mode, prehaps it will work now. Also added a manual model override function. -so if you were using tcpip in version 2.2.1 it should work now provided you set the model. Actually I had no idea labview automatically handles VISA over TCPIP like that. So that's a win V2.2.3.1 http://s000.tinyupload.com/?file_id=22255824192654410391 --- End quote --- Hi V2.2.3.1 has the following issues: - If I start out with Long Memory Capture it works. - If I then switch to Realtime waveform, no waveform is shown on the screen (but it does update, the graticules jump in some out-ranging mode?) - Screenshot still does not work. - If I then go back to Long Memory Capture the program locks up and I need to force-close it nb: after the first malfunction the scope shows the "Parameter Limited" error, which stays there |
| Navigation |
| Message Index |
| Next page |
| Previous page |