Products > Test Equipment
Rigol DS1000z/2000/4000/6000 Waveform Capture Utility
<< < (9/10) > >>
Andycap:
This has the potential to be a great tool.  I had a play around with it last night and apart from the function errors that kept showing up on the scope (DS1054z 100mhz) it ran great.  I did not have any crashes in the 3 hours that I was using it.  I did find a few layout errors and also would be great if it was resizable and auto scale the windows inside the main screen.

Keep up the great work.  ;D
rosbuitre:

--- Quote from: AlessandroAU on December 24, 2014, 05:38:33 am ---
--- Quote from: aroby on December 24, 2014, 05:02:33 am ---Just tried 2.2.3 with USB.  I can connect and it detects a DS2000 series.  I can change channels (although 3 & 4 are not present on the scope!).  I can't do a continuous sample and get a waveform - scope just displays input is invalid, changing the scope scales has no effect on the charts, I can't get a screenshot.  And when I exit, I get a dialog box saying Resetting VI: Rigol_Capture.vi, which I can only get rid of by killing the process.

So, for me, 2.2.3 is broken compared to 2.2.1

--- End quote ---

Its very odd that that real-time mode has broken, I have not made any changes.

I took a look at the ds2000 programming guide, looks like prehaps the ds2000 needs a few extra commands to get the memory buffer. Also removed a command from realtime mode, prehaps it will work now.

Also added a manual model override function. -so if you were using tcpip in version 2.2.1 it should work now provided you set the model. Actually I had no idea labview automatically handles VISA over TCPIP like that. So that's a win

V2.2.3.1

http://s000.tinyupload.com/?file_id=22255824192654410391

--- End quote ---

Hi AlessandroAU
Have available a new version?, this can not be downloaded.
Thanks for your effort !!

Regards

cubitus:
Hello,

I can not run properly Rigol_V2.2.3.exe here are the launch of errors.

What to do?

thank you
miguelvp:

--- Quote from: cubitus on July 02, 2015, 02:39:46 pm ---Hello,

I can not run properly Rigol_V2.2.3.exe here are the launch of errors.

What to do?

thank you

--- End quote ---

From the OP

--- Quote ---Its written in Labview so you will need the Labview RTE http://www.ni.com/download/labview-run-time-engine-2014/4887/en/

--- End quote ---
cubitus:
Hello,

This does not change anything ...
Navigation
Message Index
Next page
Previous page
There was an error while thanking
Thanking...

Go to full version
Powered by SMFPacks Advanced Attachments Uploader Mod