Products > Test Equipment

Rigol DS1000z/2000/4000/6000 Waveform Capture Utility

<< < (9/10) > >>

Andycap:
This has the potential to be a great tool.  I had a play around with it last night and apart from the function errors that kept showing up on the scope (DS1054z 100mhz) it ran great.  I did not have any crashes in the 3 hours that I was using it.  I did find a few layout errors and also would be great if it was resizable and auto scale the windows inside the main screen.

Keep up the great work.  ;D

rosbuitre:

--- Quote from: AlessandroAU on December 24, 2014, 05:38:33 am ---
--- Quote from: aroby on December 24, 2014, 05:02:33 am ---Just tried 2.2.3 with USB.  I can connect and it detects a DS2000 series.  I can change channels (although 3 & 4 are not present on the scope!).  I can't do a continuous sample and get a waveform - scope just displays input is invalid, changing the scope scales has no effect on the charts, I can't get a screenshot.  And when I exit, I get a dialog box saying Resetting VI: Rigol_Capture.vi, which I can only get rid of by killing the process.

So, for me, 2.2.3 is broken compared to 2.2.1

--- End quote ---

Its very odd that that real-time mode has broken, I have not made any changes.

I took a look at the ds2000 programming guide, looks like prehaps the ds2000 needs a few extra commands to get the memory buffer. Also removed a command from realtime mode, prehaps it will work now.

Also added a manual model override function. -so if you were using tcpip in version 2.2.1 it should work now provided you set the model. Actually I had no idea labview automatically handles VISA over TCPIP like that. So that's a win

V2.2.3.1

http://s000.tinyupload.com/?file_id=22255824192654410391

--- End quote ---

Hi AlessandroAU
Have available a new version?, this can not be downloaded.
Thanks for your effort !!

Regards

cubitus:
Hello,

I can not run properly Rigol_V2.2.3.exe here are the launch of errors.

What to do?

thank you

miguelvp:

--- Quote from: cubitus on July 02, 2015, 02:39:46 pm ---Hello,

I can not run properly Rigol_V2.2.3.exe here are the launch of errors.

What to do?

thank you

--- End quote ---

From the OP

--- Quote ---Its written in Labview so you will need the Labview RTE http://www.ni.com/download/labview-run-time-engine-2014/4887/en/

--- End quote ---

cubitus:
Hello,

This does not change anything ...

Navigation

[0] Message Index

[#] Next page

[*] Previous page

There was an error while thanking
Thanking...
Go to full version
Powered by SMFPacks Advanced Attachments Uploader Mod