| Products > Test Equipment |
| RIGOL DS1054Z recording linear history |
| (1/3) > >> |
| archer60x:
I am pretty new to oscilloscopes so forgive my lack of knowledge. My automotive diagnostic hero Ivan on YouTube Pine Hollow Auto Diagnostic channel has convinced me that i have to have a scope. He is right. You can really see what is going on to make a call on what is bad and what is good. He uses a Pico Scope. I have a Rigol DS1054Z and i am wondering is there a way to export or use USB cable and PC software to view data in a linear time line form? See attached. You can see the 3 measurements he is doing and looking at the synchronization to make sure things are in time with each other. Thanks for any ideas or feedback! Chad |
| RoGeorge:
It is possible in many ways, depending on your computer. It is even possible to access the oscilloscope from a distance, by LAN, for example if you have the desktop PC in the house and the car+oscilloscope in the garage. The picture reminds of Sigrok. Sigrok supports many instruments, including the DS1054Z. Install Sigrok and see if it can talk to your ds1054z. There are other dedicated programs, too, depending on what operating system your computer has. What OS is on your PC? What program is that in the picture, that you want to use it together with the DS1054Z? |
| Fungus:
Sigrok works with a DS1054Z https://sigrok.org/wiki/Rigol_DS1000Z_series |
| archer60x:
I have a windows laptop. The picture is the Pico Scope Software. I hear it is very good software, but i would assume only for the Pico products. I will download and try Sigrok! I appreciate the help! I am in IT so i can check out the ethernet side of the scope. That would be interesting to not be tied together with a USB cable. Chad |
| Fungus:
--- Quote from: archer60x on November 12, 2022, 01:45:46 pm ---I am in IT so i can check out the ethernet side of the scope. That would be interesting to not be tied together with a USB cable. --- End quote --- The DS1054Z's Ethernet is easy. You just connect to IP port 5555 and send it ASCII commands. https://www.rtelecom.net/userfiles/product_files_shared/Rigol/Oscilloscopes/MSO1000Z/DS1000Z_Programming%20Guide_EN.pdf |
| Navigation |
| Message Index |
| Next page |